Epson 50 - Artisan 50 - Printer, Руководство по обслуживанию

Страница: 82 / 129

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50 Revision C
Chapter 4 Disassembly/Assembly 4.4.8 Ink System (Disassembling the Printer Mechanism) 82
Confidential
„ CDR Guide Sensor Removal
1. Disengage the two hooks on the back of the CDR Guide Sensor and remove
the CDR Guide Sensor.
Figure 4-66. Removing the CDR Guide Sensor
4.4.8 Ink System
† Parts/Components need to be removed in advance
Printer Cover / Paper Support Assy / Upper Housing / Main Board Unit / Panel Assy /
Cover Open Sensor / Printer Mechanism
† Removal procedure
„ When installing the Left Guide Stacker, insert the rib indicated
with in
Fig.4-65 and match the positioning holes and guide
pins indicated with (two pairs).
„ When installing the Right Guide Stacker, match the
positioning holes and guide pins indicated with
(two
pairs) in Fig.4-65 .
Figure 4-65. Installing the Left / Right Guide Stacker
Right Guide
Stacker
Left Guide
Stacker
[Back Side]
Hooks
Right Guide Stacker
CDR Guide Sensor
C A U T I O N
„ Take extra care not to spill ink and contaminate the
surroundings. Also, when removing the Waste Ink Tube, be
careful not to spill the ink.
„ Extra care must be taken to avoid injury from sharp edges of
the rib of the Main Frame.
„ Be careful not to drop and damage the shaft of the Carriage
Lock and the Torsion Spring, as they easily come off.
Figure 4-67. Ink System
C H E C K
P O I N T
See the section given below on how to unlock the carriage.
•
“4.1.8 How to Unlock the Carriage”
Shaft of the
Carriage Lock
Torsion Spring
Pump Section Pump Section