Epson 50 - Artisan 50 - Printer, Руководство по обслуживанию

Страница: 27 / 129

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50 Revision C
Chapter 2 Operating Principles 2.3 Power-On Sequence 27
Confidential
6-2.The PF Motor rotates clockwise while monitoring
the PG sensor.
Any
position
6-3.After the PG sensor switched from Off to On, the
PF Motor rotates clockwise by the specified step
until it detects the PG-- (APG home position). ↓
6-4. After detecting the APG home position, the carriage
slightly moves to the 80-digit side. ↓
6-5. After the PF Motor rotates counterclockwise by the
specified step, it rotates clockwise to confirm the PG
sensor is set to On-state.
PG--
6-6.The carriage slowly returns to its home position.
↓
7. Setting the APG to PG++
7-1.The carriage slowly moves to the Right Frame and
stops there.
↓
7-2.The PF Motor rotates clockwise and sets to PG++.
PG++
7-3.The carriage slowly returns to its home position.
↓
8. PF initialization
8-1.Checks if paper exists by the PE sensor
*5
and the
PF Motor rotates clockwise for one second.
↓
9. PF Motor measurement
9-1.The PF motor rotates clockwise for four seconds,
and performs a load measurement. *6
↓
10.Low temperature operation sequence *7
10-1.The PF Motor rotates clockwise, and releases the
CR lock.
↓
10-2.The carriage moves back and forth between CR
lock and the 80-digit side for two times.
↓
Table 2-5. Operation of the power-on sequence
Operation
*1
Carriage/PF roller
movement and position *2
PG
*3
11.Setting the APG to PG--
11-1.The carriage slowly moves to the Right Frame
and stops there.
↓
11-2.The PF Motor rotates clockwise and sets to PG--.
PG--
11-3.The carriage slowly returns to its home position.
↓
12.CR measurement and PW sensor initialization
12-1.The PF Motor rotates clockwise, and releases the
CR lock.
↓
12-2.The carriage slowly moves to the 80-digit side.
↓
12-3.The carriage performs a load measurement while
moving to the VHCheck position, and records the
detected voltage of the PW sensor at the specified
three positions, then stops.
↓
12-4.The carriage detects the voltage of the PW sensor
at the carriage stop position (the black area at the
Paper Guide Front). ↓
12-5.The carriage performs a load measurement while
moving to the 0-digit side, and stops. ↓
12-6.The carriage performs a load measurement while
moving to the VHCheck position, and records the
detected voltage of the PW sensor at the specified
three positions, then stops.
↓
12-7.The carriage detects the voltage of the PW sensor
at the carriage stop position (the black area at the
Paper Guide Front).
↓
12-8.The carriage performs a load measurement while
moving to the 0-digit side, and stops. ↓
(Continue to the next page)
Table 2-5. Operation of the power-on sequence
Operation
*1
Carriage/PF roller
movement and position *2
PG
*3