![background image](http://html.mh-extra.com/html/epiphan/standalone-vga-grid/standalone-vga-grid_user-manual_2417802028.webp)
Standalone VGA Grid User Guide
1-1 Connect to the Admin Interface
System
Action Needed
Linux
The Avahi implementation used for DNS-based discovery is shipped with most Linux
distributions. If necessary, check with your administrator to ensure you have the Avahi
package installed.
To access the Standalone VGA Grid's web interface via DNS service discovery:
1. Find the system’s serial number. It is printed on a sticker on the back of the system.
2. Type the following string into the address bar of your web browser on your admin computer (where
<serial> is the serial number of your Standalone VGA Grid):
http://<serial>.local/admin
For example:
http://95dd40d5.local/admin
3. Enter the user name and password then click
OK
. The administrative user is ‘admin’. Initially no
password is set. To set a password follow the procedure outlined in
Setting and Changing User
Passwords
.
4. Optionally, navigate to the
Network
link under the Configuration heading and note the
IP address
of
the system.
Connect via the Epiphan Discovery Utility
Epiphan provides a utility for discovering Epiphan systems on your network. The Epiphan network discovery
utility is a 32-bit Windows executable that works on most 32-bit and 64-bit Windows operating systems.
Download and install the utility via this link:
http://www.epiphan.com/downloads/NetworkDiscovery.exe
.
To access the Standalone VGA Grid's web interface via the Epiphan discovery utility:
16