![background image](http://html.mh-extra.com/html/epiphan/standalone-vga-grid/standalone-vga-grid_user-manual_2417802086.webp)
Standalone VGA Grid User Guide
2-4 Fine-tune source configuration
Remove the combing effect on images
When frames are interlaced, artifacts from one frame may appear on the next frame. This occurs when a fast
motion video is interlaced. Since each frame is captured from a different point in time, the action captured in
one frame is carried over to the next frame. The result is a blurred image and horizontal lines running across
the video.
To convert an interlaced source signal to a non-interlaced signal.
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin.
3. From the web interface, scroll to the Sources menu option.
4. Click on the desired video source ; the source configuration page opens.
5. Enable the
Enable deinterlace
setting.
6. Click
Apply
. View the output in the Snapshot preview below.
Force the capture card to use a specific EDID
Extended display identification data (EDID) is data provided by a video display device (usually a monitor) to
describe its capabilities to a video source (usually a graphics or video output card in a PC or another device).
The video source uses the EDID to determine the capabilities of the monitor to determine the resolution, color
depth and other settings that the monitor can support.
EDID is crucial for DVI sources but mostly ignored by VGA sources.
74