![background image](http://html.mh-extra.com/html/epiphan/standalone-vga-grid/standalone-vga-grid_user-manual_2417802242.webp)
Standalone VGA Grid User Guide
7-7 Storage Disk Maintenance
7-7
Storage Disk Maintenance
Your Standalone VGA Grid is equipped with one or more hard drives for storage of recordings. Occasionally,
maintenance is required for these disks. This section describes procedures for the following topics:
l
Check disk storage space
l
Schedule disk check
l
Perform disk check
l
Rebuild or replace storage disks
l
Verify RAID storage
l
Read data from removed storage disks
Check disk storage space
Standalone VGA Grid has a finite amount of storage By default, the standalone and networked version have 3
TB of storage. This storage space holds a lot of recordings, but it can get full. It’s a good idea to monitor your
current disk usage.
If available storage is low, consider removing some unneeded recordings or setting up an automatic file
transfer with deletion after transfer. See
File Maintenance
and
File and recording transfer
.
Disk space can also be checked via the tablet interface. See
Verify disk space via the tablet
interface
.
To check disk storage space:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin or operator.
3. Check the
Internal Storage
section at the bottom of the menu column. The bar will be mostly green if
there is lots of space left, or mostly red if storage space is nearly full.
230