![background image](http://html.mh-extra.com/html/epiphan/standalone-vga-grid/standalone-vga-grid_user-manual_2417802096.webp)
Standalone VGA Grid User Guide
3-1 Create and configure channels
d. Enter the position coordinates. Position coordinates are based on where the source’s image will
appear. Each axis represents 100 percent. The first value is the image’s position along the x axis
(horizontal axis). The second value is the image’s position along the y axis (vertical axis).
Coordinate 0,0 is the top left corner of the stream. The x axis continues along the top
to the right side. The y axis continues down to the bottom. The right side is 100 % on
the x axis and the bottom is 100 % on the y axis.
See the examples below to learn how to create side by side and picture in picture layouts.
10. When you have added and positioned all your sources, click
Apply
.
Example: Side by side sources
You can arrange the sources so they each occupy a part of the screen, but none overlap. Using this option, the
background matte (image or color) will be visible if the sources don't occupy the full size of the frame.
To place sources side by side:
1. Add the source by clicking
Add Source
, then selecting the source from the drop down list.
2. Enter the size of the image based on the percent of the x and y axis the image will span.
In the example above the left image is positioned at the 0 on the x-axis (left side of the
frame) and 30 on the y-axis (starting approximately one third of the way down the frame).
It spans 50% of the x axis and 50% of the and y axis.
The right image is positioned at 50 on the x-axis (half way into the frame) and 30 on the y-
axis (about one third of the way down the frame). It also occupies 50% of the x axis and
50% of the y axis. The black background matte is visible where the sources don't occupy
the full frame.
3. Click
Apply
.
84