Standalone VGA Grid User Guide
2-2 Configure a video source
Value
Description
PLL adjustment
Changing the value adjusts the horizontal resolution of the image. Adjust the
value using small increments until the image is sharper. The value ranges from 0-
999 to 999.
Configurable for VGA sources only.
Offset
The Offset and Gain parameters function as contrast control for an image. The
Offset controls the darker parts of the image and the gain controls the bright
parts of the image. Adjust both values to optimize image quality. Adjust the
values using small increments until the image is sharper. If you set Offset to a
high value, set a high value for the gain to balance the two.
Configurable for VGA sources only.
Gain
The Gain and Offset parameters function as contrast control for an image. The
Gain controls the bright parts of the image and Offset controls the darker parts
of the image. Adjust both values to optimize image quality. Adjust the values
using small increments until the image is sharper. If you set Offset to a high
value, set a high value for the Gain to balance the two.
Configurable for VGA sources only.
Aspect Ratio
Sets the aspect ratio of the captured image. The default is 4:3. Set the value to
Wide mode when capturing images that have a wide aspect ratio. Using the
incorrect setting causes the image to be distorted or stretched.
Configurable for VGA sources only.
HSync threshold
Adjust horizontal sync detection.
Configurable for VGA sources only.
VSync threshold
Adjust vertical sync detection.
Configurable for VGA sources only.
Rotate
This feature is useful when a source captures video that is rotated 90⁰ or is
displayed upside down. Choose one of the following values to change the video
orientation while streaming:
l
No rotation
l
90⁰ clockwise
l
90⁰ counter clockwise
l
180⁰
63