![background image](http://html.mh-extra.com/html/epiphan/standalone-vga-grid/standalone-vga-grid_user-manual_2417802200.webp)
Standalone VGA Grid User Guide
5-4 File and recording transfer
Manually copy recorded files to USB drive
You can manually copy recorder files to a USB drive connected to the Standalone VGA Grid.
This procedure is separate from automatic file upload and does not need any pre-configuration in the
automatic file upload page.
To manually copy recorded files to a USB drive:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin.
3. Select the
External USB Drive link
in the Configuration section; the External USB Drive configuration
page is displayed.
4. Select
used to manually move/copy selected files via web interface
from the drop down list.
5. Click
Apply
; the changes are saved.
If a conflict is reported regarding the Automatic file upload, go to the Automatic File Upload
configuration page and disable automatic file upload or switch it to a non-USB based
upload type. Repeat the steps above.
6. Insert your USB drive in an available USB port on the system. (It is recommended you only use one USB
drive at a time.)
7. To download files for a specific channel:
a. Select the desired channel from the Channels list
b. Click the
Files Archive
link for the selected Channel
8. To download files for a recorder:
a. Select the desired recorder from the Recorders list
9. Select the check box next to the files you wish to download. In the example below the topmost file is still
recording and cannot be downloaded.
188