![background image](http://html.mh-extra.com/html/epiphan/standalone-vga-grid/standalone-vga-grid_user-manual_2417802099.webp)
Standalone VGA Grid User Guide
3-1 Create and configure channels
5. Click
OK
to continue or
Cancel
to stop. If you proceed, a message indicating that the channel was
successfully deleted appears at the top of the page.
Rename a channel
By default, channels are automatically configured with the same name as their source, however there may be
circumstances when you want to create a distinct name for the channel to reflect the source(s) it contains.
Channels that contain multiple sources are not automatically named to reflect the source and can be named
during configuration.
To rename a channel:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin.
3. From the web interface, scroll to the Channels menu option.
4. Click on the channel you want to rename; the menu expands.
5. Click any link for the channel; the corresponding channel status or configuration page opens.
You can change a channel's name from any of it's configuration pages.
3. Click the channel name at the top of the channel configuration page; the name text becomes red to
indicate that it is editable.
4. Highlight the old name and press backspace or delete on the keyboard.
5. Type the new name, using alphanumeric characters. It's recommended (but not mandatory) that you
use underscores to separate words, if needed.
6. Press Enter on the keyboard. The name is updated at the top of the screen and in the list of Channels in
the navigation menu.
You must press the Enter key on the keyboard for the change to take effect.
87