ATH2 Owner’s Manual
SAFETY!
SAFETY!
1)
Read and understand instructions and heed warnings before beginning installation.
2)
Mount rail securely. The lens is heavy, and requires a secure and stable surface. Fasteners in
sheetrock alone are not safe. Reciprocal lens motion can and will work them loose. Use a
board, plate, or projector mount fixed to ceiling joists or studs.
3)
Ladder caution: Exercise extreme caution when working on a ladder. Do not work directly
above another person, particularly a child. Plan all work carefully. Accidentally dropping a
drill, hammer, or the lens assembly can cause serious bodily injury.
4)
Unexpected lens movement: Anticipate all lens motion. A malfunction can cause the lens to
move unexpectedly. While on a ladder, do not stand in direct path of lens in case of
unexpected or accidental movement. Disconnect power when installing, working on, or
repositioning the lens.
5)
Indoor use only: Do not install lens in a wet or moist environment, or where the mechanism
will be exposed to extreme or external weather conditions.
6)
Object and liquid entry: Never pour any liquid or push any object into the enclosure.
7)
Power Sources: The power adaptor is intended for 100- 220 volt, 50-60 cycle AC power only.
8)
Power Cord: Do not subject power cord to conditions which will wear through or cut the
insulation. Avoid excessive tension or chafing of the cord.
9)
Service: Do not service the motor drive or electronics. There are no user serviceable parts.
Contact your dealer. Send only to a factory approved facility.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
©
Panamorph Inc January 2009 – All rights reserved
Page
1
