EOS Emotec D, Инструкция по установке и эксплуатации

Страница: 55 / 68

55
EN
Service intervals - allows to check the remaining time until the next pending servicing /
maintenance of your sauna. The intervals will be set by your specialist dealer (installer) during
the installation and setup.
Contacts
- shows you the contact information of the sauna control unit manufacturer or
your specialist dealer (installer). This information will be also displayed during error messages.
Display brightness
Here you can set the display brightness in 3 stages.
Holiday home mode
With this function you can restrict the access to the control panel with your own pin code down
to the bare minimum of functions. All other functions will be disabled and their symbols will not
be displayed.
Following settings are possible when the holiday home mode is active:
• Sauna on / off
• Light on / off
• Selection of the operation mode - dry or humid (only for EmoTec H)
• Temperature setting
• Humidity setting (only for EmoTec H)
To activate the mode press on the symbol. A pin code prompt window with default “0000“ will
open. Set your personal pin code with the jog dial. Rotate the jog dial to select a number and press
shortly to confirm it and to jump to the next digit. After the 4th digit the display will return to the
start screen and the holiday home mode will be activated.
Hint: To cancel the activation while setting the code press shortly on the main on/off button.
To unlock the control panel rotate the jog dial to reach the main navigation menu. Select the
symbol. Press on this symbol with the jog dial. The pin code prompt window will open (“0000“
default display). Enter your pin code to unlock the control panel.
Reset
holiday home mode
Select the symbol and press on it with the jog dial for approx. 1 minute. The pin code prompt
will open, confirm all four zeros with the jog dial. After the 4th digit the control panel will be un-
locked and will return to the start screen. The pin code will be reset.