50
EN
Notice
: You can assign up to 4 programs to each day of the week. The maximum duration of a switch-
ing time depends on the configuration of jumper JP5 on the relay box. According to legal regulations, a
continuous break time of at least 6 hours must be met within a period of 24 hours
Furthermore, you can assign individual temperature (and humidity for EmoTec H) to each program for
automated sauna operation. This allows to implement flexible energy management schemes in your
sauna - for instance during peak-off times you may set the sauna to run at lower temperatures with re-
duced energy consumption, so that it can then reach the full temperature faster at the main time of use.
Now select the program (1 of 4) and press on the jog dial knob.
1. Set the required start time (hours and minutes) - e.g. 9:30.
2. Set the required switch-off time (hours and minutes) - e.g. 9:30 + 3:30 = 13:00
(The heating duration is displayed at the bottom of the status line instead of the time)
3. Set the required operation type - dry Finnish sauna or humid sauna (only EmoTec H)
4. Set the required temperature.
5. Set the required humidity (only EmoTec H).
After the last step the control panel will return to the week overview. All days with assigned pro-
grams will be displayed in green. Repeat the above steps for every new program you may require
(max. 4 per day). After you return to the main start screen you will see the indication of the next
(earliest) switching time flashing in the bottom right corner (e.g. Monday, 9:30).
How to delete or change the week timer
In order to delete or change the program open the week timer via the main navigation menu.
1. Select the respective day of the week.
2. Select the respective program number.
3. Make the necessary adjustments (start time, switch-off time, temperature) or...
4. to delete the program, set the start time (hour and minutes) to „--“
and press the jog dial two times shortly to confirm and exit.
5. The display will return to the week overview.
Notice
: With an active week timer you will always see the next earliest switching time displayed
flashing in the bottom right corner. Also if you programmed several switching times or a combina-
tion of the single event switching and week timer switching.
Potential-free contact
With the potential-free contact (output) you can switch an external device up to 16 A on or off.
This function has to be enabled in the setup menu and the external device has to be properly
connected and configured.
Please observe that the potential-free contact output only provides a switching signal.
In the main navigation menu select the
symbol and press on the jog dial shortly. In the sub-
menu you can now select and press on the
(on) or
(off) symbol in order to make the
respective switching.
If you cannot find the symbol of the potential-free contact in the main navigation menu please
contact your local dealer to have this function enabled.
Содержание Emotec D
Страница 68: ...68 DE...
