Environnement MP101M, Техническое руководство

Страница: 93 / 196

Duplication prohibited
MP101M
Environnement
S.A
3–37
SEPTEMBER 2013

Maintenance field: when this field is ON, it enables the user to trigger one of the alarm relays.

Light screen Off delay field allows the user to program the time delay after which, without any
action on keyboard, the screen passes to stand-by mode.

Starting screen field enables the user to select the screen to be displayed after warm-up, when
the device is started-up. Four screen selections are possible: « Instantaneous », « Synoptic », «
Average », « Graphic », of the « MEASUREMENT » menu.
3.3.4.3 CONFIGURATION

Measure channels
This screen is used to select the parameter, and the display format for each measure channel.

Channels number field allows the user to program the number of processed channels (maximum
32). When more than eight parameters are programmed, the [>>] and [<<] keys enable the user to
go from the 1 to 8 parameters page to the 9 to 16 parameters page.

Formats fields are used to choose the display format from 4 possibilities (X.XXX, XX.XX, XXXX.X,
XXXX). The "Auto" format manages the comma place in order to display the best resolution at any
time.

Units fields refer to the units programmed in the « CONFIGURATION

Offsets and units» screen.
It is possible to modify the measurement channels order by selecting the channel name, then using
the [

], [

], [

] keys then the F6 key.
Once placed on the channel name, it is possible to suppress this channel (press down the [F6] key,
then the [Sup] key), and/or insert a new one (press down the [F6] key, then the [Ins.] key).