Environnement MP101M, Техническое руководство

Страница: 77 / 196

Duplication prohibited
MP101M
Environnement
S.A
3–21
SEPTEMBER 2013
Press down the [Start] key to launch the calibration.
This screen is used to monitor the phases sequence using the «
>
» cursor.
The instrument enters into the « Initialization » phase, the filter paper is fed for one step, and the
pressure plate is placed into high position, against the filter paper. Then, the pump starts: the device
passes into the « Drying paper » phase with visualization of the drying time countdown.
Then the instrument passes into « Blank » mode and displays the countdown of pre-heating time of
the GM counter, and the measurement of blank counting. The left side value gives the instantaneous
counting value, the right side value gives the average value of the previous counting.