Environnement MP101M, Техническое руководство

Страница: 60 / 196

Environnement
S.A
MP101M
Duplication prohibited
SEPTEMBER 2013
3–4
3.1 INITIAL START-UP
The monitor is checked and calibrated in factory before delivery.
3.1.1 PRELIMINARY OPERATIONS (FIGURE 3–1)
Start-up first consists in carrying out the following preliminary operations:

Visually examine the interior of the instrument to ensure that no component has been damaged
during transport.

Connect the supply cable of the pump assembly (5).

Connect the pump sampling pipe to the analyzer "pump outlet" (8).

Connect the regulated sampling tube (RST) as indicated in section1.2.4.2 / a.3 of chapter 1, titled
as:
Installing the regulated sampling tube (RST) .

Connect the cord of sampling head heating (3) and the supply cable of the meterological sensors
(6).

Connect the electrical (mains) power supply cable (1) to a 230 V - 50 Hz + ground socket or to a
115 V - 60 Hz + ground socket, according to the power supply specified on order.

Connect the digital outlets to the DB25 connector (4).

Connect the TCP/IP socket (7) if needed.

Connect the CPM socket (11) if CPM option available.
(1) general fuse F1 and electrical (mains) power supply block, (3) TUCHEL connector for heating of
sampling head inlet, (4) RS232/RS422 socket, (5) power supply of external pump, (6) head sensors,
(7) TCP/IP socket, (8) pump outlet, (11) connection socket with the CPM option.
Figure 3–1 – Fluids and electric connection