Environnement MP101M, Техническое руководство

Страница: 104 / 196

Environnement
S.A
MP101M
Duplication prohibited
SEPTEMBER 2013
3–48
3.3.6.3 TESTS

Mother board inputs - outputs
This screen is used to test the analog inputs/outputs of the mother board:

Correct operation of the motor.

Pump and Geiger counter controls.
(1
)
3.3.6.3.1 Motor for moving on filter ribbon :
To parameter the motor for moving on filter ribbon, proceed in the order :

Using the [

] [

] keys, go to the Filter field of screen (1).

On the last line of screen (1), press down the [Test] key : the screen shown below is displayed:

In this screen, press down the [s] key to start the motor moving the filter spools. The motor stops
after seven seconds.