manualshive.com logo in svg

Environnement MP101M, Техническое руководство

Поделиться
Скачать
Environnement MP101M Скачать руководство пользователя страница 107

Duplication prohibited

 

MP101M

 

Environnement 

S.A

 

 

 

3–51

SEPTEMBER 2013 

3.3.6.3.4 

Valve motor :  

 

Using the [

] [

] keys, go to the 

Valve

 field of screen (1). 

 

On the last line of screen (1), press down the [Test] key : the 

« Valve »

 screen is displayed. 

 

In this screen, press down the [Pts] key located under « Opening » to start up the valve motor in 
Opening. Check that the valve motor turns correctly towards the left (user being placed in front of 
the valve).  

 

Then press down the [Pts] key located under « Closing » to start up the valve motor in Closing. 
Check that the motor valve turns correctly towards the right (user being placed in front of the 
valve).  

 

 

 

NOTE : 

 The [Max] keys located under « Opening » and « Closing » enable to completely open 
and close the valve. 

 

Содержание MP101M





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды