Environnement MP101M, Техническое руководство

Страница: 109 / 196

Duplication prohibited
MP101M
Environnement
S.A
3–53
SEPTEMBER 2013
(3)
When the cursor indicates « Start », press down the [Start] key to launch the Gauge test.
(4)
The analyzer carries out an initialization by moving ahead a new part of filter paper towards the
measurement position. Then, it controls the pump switching-on which will operate during 120 seconds
in order to dry the filter paper. After what it carries out a blank measurement.
When the blank measurement is finished, the analyzer carries out, on the same part of filter paper, the
number of gauge tests programmed (10 in this screen), in order to check the stability of the beta
gauge.
The test can be stopped at any time by pressing down the [Stop] key: in this case, the analyzer
displays the screen (3) of the gauge test start.
In this screen (3), press down the [<<] key to display the screen (2) and press down the [Report] key.
The next screen is displayed, as shown below: