Environnement MP101M, Техническое руководство

Страница: 141 / 196

Duplication prohibited
MP101M
Environnement
S.A
4–19
SEPTEMBER 2013
MAINTENANCE SHEET
Monitor serial No.: OPERATION SHEET: 4.3.6
Scope : Verification of pressure exerted on the filter PAGE : 1/2 Periodicity : 1 year
Dates
Procedure :
1/ Stop any measurement in progress, if necessary.
2/ Go to the «
TESTS

Mother board Inputs - Outputs »
screen and make the plate moves down :
go to the
Plate
field then press down the [Test] key, then the [ s ] key under
Mov. down
.
3/ Open the door of the analyzer using the knurled button located on the left.
4/ Raise the disengageable pinch roller, as shown in the just below picture :
5/ Insert a "smooth" paper between the filter ribbon and the driving capstan (the right one). Only the
capstan rotation must cause the moving on of the ribbon filter, as shown in the just below picture.
6/ In the «
TESTS

Mother board inputs - outputs »
screen
,
make the paper moves on
continuously by pressing down the [ ... ] key under
Test
after having selecting the
Filter
line with the
F6 key.
7/ Keep in position the paper (inserted between the ribbon and the capstan) to prevent its driving on
by the capstan.