Environnement MP101M, Техническое руководство

Страница: 41 / 196

Duplication prohibited
MP101M
Environnement
S.A
1–23
SEPTEMBER 2013
1.2.5. CERTIFICATIONS
1.2.5.1. PM
2.5
USEPA designation
The PM
2.5
automatic analyzer of particles, MP101M model, is nominated USEPA equivalent
method as defined by the code of federal laws CFR 40, Part 53, when it operates under the
following conditions:
1. Use of a sampling head specified in the 40 CFR 50, appendix L paragraph 7.3.2** and 7.3.4.4*** or
in the previous model “flat-topped 246b”.
2. Use of the RST* sampling tube is required.
3. Use of the following configuration:
Parameter Value Paragraph of the manual
Concentration unit
µg/m
3
3.3.4.4
Flow unit
l/min 3.3.4.4
Cycle timing
24 h 3.3.4.2
Period timing
1 h 3.3.4.2
Counting (time)
0200 s 3.3.4.2
(Programmed) flow-rate
1.00 m
3
/h 3.3.4.2
N.R.A counting
OFF 3.3.4.2
RST
ON 3.3.4.2
(*) RST : regulated sampling tube
(**) : 7.3.2
Inlet.
The sample inlet shall be fabricated as indicated in Figures L-2 through L-18 of this
appendix and shall meet all associated requirements.
(***) : 7.3.4.4 The cyclone-type separator is identified as a BGI VSCC
TM
Very Sharp Cut Cyclone
particle size separator specified as part of EPA-designated equivalent method EQPM-0202-142 (67
FR 15567, April 2, 2002).