Endress+Hauser StamoLys CA 71 HY, Руководство по эксплуатации

Страница: 44 / 60

Troubleshooting Stamolys CA71HY
44 Hauser
9.4 Return
If the analyzer requires repair, please send it cleaned to your sales center.
Please use the original packaging when returning the device.
Please enclose the completed "Declaration of Contamination and Cleaning" form (copy the second
last page of these Operating Instructions) with the packaging and also the shipping documents. The
unit cannot be repaired if this declaration is not duly completed!
9.5 Disposal
Electronic components are used in the product. For this reason, the product must be disposed of as
electronic waste.
Please observe local regulations.
07/2004 5.6 Extension
• Range of adjustment for delay to sample to 999s
• Range of adjustment for cleaning duration to 300s
• Range of adjustment for frequencies to 5800 Hz
• Factory settings accepted as specified
• Altered measuring cycles for AM-D, AL-A (like hardness) BA353C/07/xx/09.04
BA357C/07/xx/10.04
05/2004 5.5 Extension/improvement
• Longer initialization
• Altered measuring cycle for SI
• Shortened reaction time, AM-C (90 s)
• SI-A: 0 Hz signal error only after 90 s
• Reason for crashing during frequency display in SERVICE
eliminated
• Restart after power failure
BA364C/07/xx/06.04
03/2004 5.4 Extension/improvement
• New process: HA
• Menu extension: Cell drain time
• Calibration valve off during reaction
• Hungarian and Spanish no longer available
• New hardness engineering units
• New standard parameters/factory settings
• Stepping motor activation corrected BA361C/07/xx/02.04
08/2003 5.3 Improvement
• Fault elimination for measuring range switchover, HA -
08/2003 5.2 Extension/improvement
• Factory settings for SI changed
• CL characteristic changed
• New startup message
• Fault elimination for output for current output, two-channel -
05/2003 5.1 Extension/improvement
• New parameter CL
• Memory correction
• Time for "Delay to sample" is used for zero measurement
• Factory settings for MN, SI, HA changed BA354C/07/07.03
12/2002 5.0 Original software BA353C/07/xx/01.03
BA355C/07/xx/01.03
BA356C/07/xx/01.03
BA357C/07/xx/01.03
BA358C/07/xx/01.03
BA359C/07/xx/01.03
BA360C/07/xx/01.03
BA361C/07/xx/01.03
BA362C/07/xx/01.03
BA363C/07/xx/01.03
BA364C/07/xx/07.03
Date Version Changes in the software Documentation