background image

1

Introduction

Thanks for purchasing a Baldwin 

Pianovelle

, a high quality product that employs the most advanced technology available to

produce real piano sounds.
Although 

Pianovelle

 is very easy to use, you are recommended to consult this manual whenever you are not sure what to do.  Of

utmost importance is, of course, how you treat your 

Pianovelle

.  Do not forget, therefore, to read the General Safety Instructions

below to guarantee a long and trouble free use of your instrument.

General safety instructions

Power source

• Be sure that your local AC mains voltage matches the voltage specified on the name plate before connecting to the mains.
• DC power cannot be used to power this instrument.

Handling the power cord

• Never touch the power cord or its plug with wet hands.
• Never pull on the cord to remove it from the wall socket, always pull the plug.
• Never forcibly bend the power cord.
• If the power cord is scarred, cut or broken, or has a bad contact, it will be a potential fire hazard or source of serious
electric shock. NEVER use a damaged power cord; have it replaced by a qualified technician.

If water gets into the instrument

• Remove the power cord from the wall socket at once, and contact the store where the unit was purchased.
• The top surface of your instrument should never be used as a shelf for flower vases and other containers  which hold
liquids.

Metal items etc. inside the unit

• Do not permit metal items or other materials to fall inside the unit.
Metal items may result in electric shock or damage.
• Be especially careful with regards to this point when children are near the unit. They should be warned never to try to put
anything inside, and never to slide a hand into the unit while you or other persons are playing.
• If articles do fall inside, remove the power cord from the wall socket at once and, if necessary, contact the store where the
unit was purchased.
• As a general precaution, never open the unit and touch or tamper with the internal circuitry.

If the instrument plays in an abnormal way

• Turn off the power immediately, remove the power cord from the mains outlet and contact the store where it was pur-
chased.
• Discontinue using the unit at once. Failure to do so may result in additional damage or other unexpected damage or
accident.

General user maintenance

• Clean the cabinet and keys of your RP1/RP2/GRP3 using a soft, clean, slightly damp cloth and polish with a soft, dry
cloth.
• Never use industrial cleaners, detergents, abrasive cleansers, waxes, solvents or polishes as they may damage the instru-
ment finish.
• Always turn off the power supply after use and never turn the unit on and off repeatedly in quick succession as this places
an undue load on the electronic components.

Содержание Pianovelle GRP3



































Отзывы: