Endress+Hauser StamoLys CA 71 HY, Руководство по эксплуатации

Страница: 23 / 60

Stamolys CA71HY Operation
Hauser 23
5.2.1 Main menu
Access the main menu by holding down the
H
key until AUTO MEASURING is displayed.
The main menu items and information on them are explained in the following table.
5.2.2 AUTO MEASURING
The actions "calibration", "measuring" and "rinsing" are triggered by time-control.
The settings for these actions are made in the "PARAMETER ENTRY" menu.
The action in question is displayed on the LC display. The most recently registered concentration
value is displayed until the end of the next measurement.
Otherwise, "wait" is displayed if:
• The time of the first measurement has not yet been reached or
• The measuring interval has not yet elapsed
!
Note!
"Measuring" flashes when the analyzer is ready for the next measurement but has not yet received
the enable signal from the sample collector or the sample conditioning unit.
Menu item Display Info
AUTO MEASURING Calibration, measurement, rinsing time-controlled actions
PARAMETER ENTRY
Default settings for measuring ranges, alarm values,
calibration, rinsing
CONFIGURATION
Basic settings such as parameters, engineering units,
assignment of analog outputs and alarm values, date,
time, offset values.
LANGUAGE For selecting the menu language
ERROR DISPLAY Displays error messages
SERVICE Foe switching valves and pumps manually
DATA MEMORY 1 Last 1024 measured values for channel 1
DATA MEMORY 2
(two-channel version only)
Last 1024 measured values for channel 2