Endress+Hauser StamoLys CA 71 HY, Руководство по эксплуатации

Страница: 15 / 60

Stamolys CA71HY Wiring
Hauser 15
4 Wiring
4.1 Electrical connection
#
Warning!
• The electrical connection may only be established by an electrical technician.
• The electrical technician must have read and understood these Operating Instructions and must
follow the instructions they contain.
• Before beginning the connection work, ensure that no voltage is applied to the cables.
4.1.1 Quick wiring guide
"
Caution!
• You have to fold out the frame of the analyzer to reach the terminal block.
• Beforehand, release the hoses from the outlet pipe. Otherwise there is a danger of flooding.
• Connect the hoses again after folding the frame back in.
Fold out the frame as follows:
1. Release the two bottom Allen screws (AF 6) by 3-4 rotations ( →
å
15, item 1).
2. Unscrew the two upper Allen screws completely so that the frame folds out. In this way, you
reach the terminal block (item 2).
a0001370
Fig. 15: Folding out the frame
1 Allen screws AF 6
2 Terminal block
!
Note!
The device does not have a power supply switch. Therefore, it is advantageous to have a fused
socket near the device.
2
M K E
RS 232
1