Endress+Hauser Proline Prowirl 72, Руководство по эксплуатации

Страница: 78 / 114

11 Description of device functions Proline Prowirl 72
78 E Hauser
11.2.4 Group OPERATION
Function description OPERATION
LANGUAGE Use this function to select the language for all texts, parameters and messages shown on
the local display.
Options:
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
NORSK
SVENSKA
SUOMI
PORTUGUES
POLSKI
CESKI
Factory setting:
Depends on country (metric system units,
→
Page 105, or US units,
→
Page 107 )
!
Note!
If you press the
P
keys simultaneously at startup, the language defaults to “ENGLISH”.
ACCESS CODE All data of the measuring system are protected against inadvertent change. Programming
is disabled and the settings cannot be changed until a code is entered in this function. If
you press the
P
keys in any function, the measuring system automatically goes to this
function and the prompt to enter the code appears on the display (when programming is
disabled).
You can enable programming by entering the private code (
factory setting = 72 , see
DEFINE PRIVATE CODE function).
User input:
Max. 4-digit number: 0...9999
!
Note!
• The programming levels are disabled if you do not press a key within 60 seconds
following a return to the HOME position.
• You can also disable programming in this function by entering any number (other than
the private code).
• The Hauser service organization can be of assistance if you mislay your
private code.
DEFINE PRIVATE CODE Use this function to specify the private code for enabling programming.
User input:
Max. 4-digit number: 0...9999
Factory setting:
72
!
Note!
• Programming is always enabled if the code defined = 0.
• Programming has to be enabled before this code can be changed. When programming
is disabled this function cannot be edited, thus preventing others from accessing your
personal code.