Endress+Hauser Proline Promass E 300, Руководство по эксплуатации

Страница: 93 / 206

Proline Promass E 300 Modbus RS485 Commissioning
Hauser 93
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Minimum frequency value The Frequency option is
selected in the Operating
mode parameter (→  88)
and a process variable is
selected in the
Assign
frequency output parameter
(→  92).
Enter minimum frequency. 0.0 to 10 000.0 Hz –
Maximum frequency value The Frequency option is
selected in the Operating
mode parameter (→  88)
and a process variable is
selected in the
Assign
frequency output parameter
(→  92).
Enter maximum frequency. 0.0 to 10 000.0 Hz –
Measuring value at minimum
frequency The Frequency option is
selected in the Operating
mode parameter (→  88)
and a process variable is
selected in the
Assign
frequency output parameter
(→  92).
Enter measured value for
minmum frequency. Signed floating-point
number Depends on country
and nominal
diameter
Measuring value at maximum
frequency The Frequency option is
selected in the Operating
mode parameter (→  88)
and a process variable is
selected in the
Assign
frequency output parameter
(→  92).
Enter measured value for
maximum frequency. Signed floating-point
number Depends on country
and nominal
diameter
Failure mode The Frequency option is
selected in the Operating
mode parameter (→  88)
and a process variable is
selected in the
Assign
frequency output parameter
(→  92).
Define output behavior in
alarm condition. • Actual value
• Defined value
• 0 Hz –
Failure frequency The Frequency option is
selected in the Operating
mode parameter (→  88)
and a process variable is
selected in the
Assign
frequency output parameter
(→  92).
Enter frequency output value
in alarm condition. 0.0 to 12 500.0 Hz –
Invert output signal – Invert the output signal. • No
• Yes –
* Visibility depends on order options or device settings