Endress+Hauser Proline Promass E 300, Руководство по эксплуатации

Страница: 77 / 206

Proline Promass E 300 Modbus RS485 Commissioning
Hauser 77
Parameter overview with brief description
Parameter Description User entry
Device tag Enter the name for the measuring point. Max. 32 characters, such as letters, numbers
or special characters (e.g. @, %, /).
10.3.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
The number of submenus and parameters can vary depending on the device version.
Certain submenus and parameters in these submenus are not described in the
Operation Instructions. Instead a description is provided in the Special Documentation
for the device (→ "Supplementary documentation" section).
Navigation
"Setup" menu → System units
‣
System units
Mass flow unit →  77
Mass unit →  77
Volume flow unit →  78
Volume unit →  78
Corrected volume flow unit →  78
Corrected volume unit →  78
Density unit →  78
Reference density unit →  78
Temperature unit →  78
Pressure unit →  78
Parameter overview with brief description
Parameter Description Selection Factory setting
Mass flow unit Select mass flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• kg/h
• lb/min
Mass unit Select mass unit. Unit choose list Country-specific:
• kg
• lb