Endress+Hauser Analytik Jena multi EA 4000, Руководство по эксплуатации

Страница: 151 / 151

multi EA 4000 Specification
151
11.2 Standards and directives
The analyzer has a protection class of I.
The housing has safety type IP 20.
The analyzer complies with the safety standards

EN 61010-1

EN 61010-2-081

EN 61010-2-010

EN 61010-2-051 (for operation with manual TIC solids module)
The analyzer has been checked for interference emission and noise immunity.
It meets the requirements for interference emission of

EN 61326-1 (EN 55011 group 1, class B)
It meets the requirements for noise immunity of

EN 61326-1 (requirements for use in a basic EMC environment)
The analyzer has been tested for environmental compatibility and meets the require-
ments of

ISO 9022-3

ISO 9022-2
The analyzer meets the requirements of Directive 2011/65/EU (RoHS II).
The analyzer has been designed and tested in accordance with standards meeting the
requirements of EU directives 2014/35/EU and 2014/30/EU. The device leaves the
factory in a sound condition as far as technical safety is concerned. To maintain this
condition and to ensure safe operation, the operator must strictly observe the safety
and operating instructions contained in this operating manual. For accessories which
have also been supplied, and system components from other manufacturers, their op-
erating instructions should be referred to.
The device contains controlled substances (according to the guideline "Management
Methods for the Restriction of the Use of Hazardous Substances in Electrical and Elec-
tronic Products"). Analytik Jena AG guarantees that the substances will not leak within
the next 25 years and, therefore, will not cause any environmental danger or health
risk within this period of time if the device is used as intended.
Protection class and
type of protection
Device safety
EMC compatibility
Environmental compati-
bility
EU directives
Guidelines for China