Operation
multi EA 4000
82
The gas sluice is correctly assembled if the gap be-
tween the pressure ring and the matching piece is
evenly approx. 1 mm wide.
5.
Fit the coupling element with three hexagon socket screws
to the right side of the basic device. Make sure that the
guide hole is above the slot in the basic device and the re-
cess points towards the front.
6.
Remove the heat guard. To do so, release 2 slotted screws
with a screwdriver.
7.
Slide the quartz tube with gas sluice up to the stop into the
combustion furnace. In the process insert the guide pins
into the guide hole (see dotted line).
1 Oxygen connection
2 Argon connection
When not using the flame sensor:
8.
Push the hose for the oxygen supply (hose no. 17) onto
the glass tube of the combustion tube (1).
9.
Connect the hose for the argon supply to the gas sluice (2).
NOTICE! The hoses must not be kinked or twisted.
The quartz tube is inserted in the multi EA 4000.
Содержание Analytik Jena multi EA 4000
