Maintenance and care
multi EA 4000
108
7.2
Operation with C/S module
Maintenance task
Maintenance interval
Inspect ceramic tube for cracks and visible
damage, replace if necessary
Every three months
Inspect and clean dust trap
Monthly (dependent on combustion and
sample matrix)
Inspect the dust filter, replace in case of visible
contamination
Monthly (dependent on combustion and
sample matrix)
Changing the desiccant in the drying tube
As required (blackening or clumping due to
moisture absorption)
Replace the halide trap
when half of the copper wool or the brass
wool is discolored
7.2.1
Inspect and replace ceramic tube
WARNING
Risk of electric short circuit! In the combustion furnace HTS1500 very high electrical
currents occur in spite of a low voltage (max. 14 V). The combustion tube is part of the
cover of live components.
Only switch on the analyzer with the combustion tube inserted! Always switch off the
analyzer from the mains switch at the rear of the device for conversions and mainte-
nance to the combustion tube or combustion furnace.
CAUTION
There is a risk of burns on the combustion furnace! Only remove the combustion tube
when the device is cold or allow the device to cool down sufficiently (best overnight)!
1.
Switch off the basic device from the mains switch, pull
the mains switch out of the outlet and disconnect the
gas supply.
2.
Create at least 50 cm space on the left side of the basic
device. To do so, move the detector module aside or turn
it to the back to expose the opening of the dust trap.
3.
Pull the contact guard off the opening. The dust trap is
now visible.
Maintenance intervals
Removing the ceramic
tube
Содержание Analytik Jena multi EA 4000
