Operation
multi EA 4000
78
The status lights at the front of the devices illuminate.
Do not switch any Cl module present. If present, switch on the automatic TIC solids
module from the mains switch at the rear.
2.
Start the multiWin program.
3.
Change between the various analyzer modules. To do so, first activate the sensors:
Select the menu command D
EVICE
D
EVICE
–
EDIT
.
4.
Enable the E
LEMENTS
to be analyzed.
If both carbon/sulfur and chlorine are enabled, click on C
ERAMIC TUBE
CS in the
list C
OMBUSTION TUBE
.
As S
TATES
enable the option
SOLID
.
5.
Initialize the system by clicking on [I
NITIALIZE
A
NALYZER
].
6.
Load a method (menu item M
ETHOD
M
ETHOD
–
ACTIVATE
) or create a new method
(menu item M
ETHOD
M
ETHOD
–
NEW
).
Select the parameter "EC/TC" for the determination of carbon after pyrolysis.
Recommended parameters for the method configuration (tab P
ROCESS
):
F
URNACE TEMPERATURE
850 °C
EC
PURGE TIME
300 s
7.
After the run-in time set the following gas flows:
pump
O
2
Set the intake flow until in the S
TATUS ANALYZER
window the value
N
OMINAL
= 100 ± 10 is displayed, corresponding to approx. 1.7
l/min
2.3 – 2. l/min
The analysis system now has time to settle down.
If the intake flow differs greatly or changes later, readjust the intake flow at the
"pump" valve of the multi EA 4000.
8.
Weigh the samples onto two ceramic boats each.
9.
Start the measurement by clicking on [S
TART MEASUREMENT
].
10.
Create or select an analysis group for storing the measuring data.
11.
Create an analysis sequence.
Add the desired number of samples to the sample table with
. Two boats
must be provided for each measurement and processed in sequence.
Enter the following data:
Column
Description
S
AMPLING POSITION
Position of the sample on the sample rack or in the analysis se-
quence for measurements with manual sample feed. The sample
rack must only be populated with ascending position numbers.
However, it does not need to be without gaps.
N
AME
Sample ID
Содержание Analytik Jena multi EA 4000
