Emotiontek MCU 2 Axis, Руководство пользователя

Страница: 21 / 204

- 14 -
Chapter 2. MC Programming
Fig.2.2 Pulse pause function
<Pause until the number of pulses set in a DO variable value is entered from the external
encoder by a “DWL 0” command. Set a parameter P63, and if M80.5 is‘0’, a pulse pause
function is used.>
Fig.2.3 Accumulated pulse pause function
<Pause until the number of pulses set in a DO variable value is accumulatively entered from
an encoder by a “DWL 0”command. If the accumulated pulse number is greater than “DWL
0”value, then the next command is executed without pulse pause. The number of accumulated
pulses is initialized to ‘0’ when the MC program starts.
Set the parameter P62 or the parameter P63, and if M80.5 is‘1’, then use the accumulated
pulse dwell function.>
VEL 0
MOV P0
DWL 0
VEL 1
MOV P1
Velocity
Time
F0
F1
Current position P0 position P1 position
Pulse pause
VEL 0
MOV P0
DWL 0
VEL 1
MOV P1
Speed
Time
F0
F1
Current position P0 position P1 position
Accumulated pulse pause