25
Parameter setting
Radio Actuator KNX RF S1R-B2 compact
• Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
Set the movement position. If it is allowed to save scenes via the bus, this position only
applies after the ETS download until the first manual saving. Afterwards, the new
movement position saved in the actuator is used.
6.2.1.5.Button inputs (drives) - Input as bus button
If an input is used as a free bus button, it will send a previously set value to the bus
when activated. In the program file of the actuator different parameters are integrated
for frequently needed bus functions. Thus, the inputs can easily be configured as a
switch, drive control, dimmer for sending values and for the scene calls.
Input as switch:
If a button with switch function is assigned to the input, select the bus function
"Switch" and specify which value is sent when pressing/releasing the button and when
it will be sent.
Scene number
0...127
Shutter position in % or
Blind position in % or
Awning position in % or
Window position in %
0...100; 50
Slat position in %
(only for shutters)
0...100; 70
Bus function
• Switch
• Selector switch
• Shutter
• Blind
• Awning
• Window
• Dimmer
• 8 bit encoder
• Temperature encoder
• Brightness encoder
• Scenes
Function
Switch
Command when pressing the button
• send 0
• send 1
• do not send telegram
Command when releasing the button
• send 0
• send 1
• do not send telegram
