manualshive.com logo in svg

elsner elektronik 70715, Установка и настройка

Поделиться
Скачать
elsner elektronik 70715 Скачать руководство пользователя страница 34

32

Parameter setting

Radio Actuator KNX RF S1R-B2 compact

 • Version: 16.09.2020 • from application 1.0 •

Technical changes and errors excepted.

Switch off delay

The switch off delay is set with a time basis and time factor (e.g. 1 min × 4 corresponds
to 4 minutes). Additionally it is specified if the time interval for a repeat receipt of a
switch-off telegram is extended ("can be triggered again", e.g. by pressing the button
again) and what happens when a switch off telegram arrives from the bus.

Staircase lighting timer

The staircase time switch sets with a time basis and time factor how long the light will
remain on (e.g. 1 s × 10 corresponds to 10 seconds). Additionally it is specified if the
time interval for a repeat receipt of a switch-on telegram is extended ("triggered again",
e.g. by pressing the button again) and what happens when a switch off telegram
arrives from the bus.

6.2.2.3.Blocking function (switch functions)

The menu item "blocking function" appears only for the settings for the switch function
channel if selected "Use blocking functions: Yes".

The output channel can be blocked by a block telegram. What happens during the
blocking, for bus voltage return and after the blocking is set here. The manual
operation is then not possible for an active block.
The function can be used for example for a light, which is turned on when pressing a
"panic button" (=trigger for blocking function) and cannot be turned off any longer.

Switch on delay cannot

be triggered again • can be triggered again

Off telegram during switch on-delay effects

nothing • direct turn off

Time basis

0.1 s • 1 s • 1 min • 1 h

Time factor

4...255; 10

Switch off delay cannot

be triggered again • can be triggered again

On telegram during switch off-delay effects

nothing • direct turn on

Time basis

0.1 s • 1 s • 1 min • 1 h

Time factor

4...255; 10

Staircase light time can

not be triggered again • can be triggered 
again

Off telegram during staircase light period 
affects

nothing • direct turn off

Blocking function blocks for

0 • 1

Value of the blocking object 
after reset and ETS download

0 • 1

Response when blocking

no change • opened • closed

Response upon release

follows switch command • opened • closed

Содержание 70715





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды