elsner elektronik 70715, Установка и настройка

Страница: 21 / 36

19 Parameter setting
Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
Blocking objects:
The output channel can be blocked in case of rain, wind or other events. The manual
operation is then not possible. Blocking and monitoring are configured here first. For
setting the individual blocks, separate menu items "Blocking X" will appear (see
chapter
Block – blocking objects , page 21, Block – wind blocking , page 21 and Block –
rain blocking , page 22).
The priorities of the blocking objects correspond to the sequence listed (Block 1 has the
highest priority, Block 5 the lowest).
Use movement limit 1/2:
The movement limits are activated here, and can them be configured in their own
menu items. See ‘Movement limits’ on Page 30.
Use Block 1 (high priority) • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use block 2 • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use block 3 • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use block 4 • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use Block 5 (low priority) • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Priority is • Block 5 over Manual
• Manual over Block 5
Use monitoring of blocking objects No • Yes
Monitoring period for blocking objects
(only if using monitoring of the blocking
objects)
5s... • 2 h; 5 min
Behaviour if a blocking object is not
received
(only if blocking object monitoring is used)
• Stop
• Up command • Down command
(Shutters/roller blinds)
• Retract command • Extend command
(Awnings)
• Close command • Open command
(Windows)