23
Parameter setting
Radio Actuator KNX RF S1R-B2 compact
• Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
Movement limits
The menu item appears only if a movement limit was activated in ‘Control’. Movement
limits can be used to restrict manual movement. The limit is active for object value 1
If limiting the movement position:
If limiting the slat angle (shutters only):
Designation
[rain blocking]
Enter a designation here!
If blocking object has value =1
• no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)
Position in % (only if by using a block, a
specific position is achieved)
0...100
Slat position in % (only if by using a block,
a specific shutter position is achieved)
0...100
Waiting period in secure position in min
after blocking
0...255; 5
Behaviour after waiting period
For manual operation before and after
blocking
• no action
• move into last position
For automatic operation after blocking
follow automatic
Limitation type
• full
• movement position
• slat angle (for shutters)
• allow UP only
• allow DOWN only
Value of the object in front of 1.
Communication and bus voltage
restoration
0 • 1
Limitation type
• movement position
Movement allowed in the position range
from (in %)
0...100
to (in %)
0...100
Limitation type
• slat angle
Movement allowed in the angle range
from (in %)
0...100
to (in %)
0...100
