manualshive.com logo in svg

elsner elektronik 70715, Установка и настройка

Поделиться
Скачать
elsner elektronik 70715 Скачать руководство пользователя страница 31

29

Parameter setting

Radio Actuator KNX RF S1R-B2 compact

 • Version: 16.09.2020 • from application 1.0 •

Technical changes and errors excepted.

Control modi for drive control

If inputs are used as buttons for operating shading or windows, then different control
modi can be set.

Standard:

If briefly operated, the drive will move incrementally or stops. If operated longer, the
drive will move up to the end position. The time difference between "short" and "long"
is set individually.

Standard inverted:

When pushed shortly, the drive moves up to the end position. When pushed for longer,
the drive moves incrementally or stops. The time difference between "short" and
"long" and the repeat interval is set individually.

Comfort mode:

In the 

comfort mode

 actuating the button briefly, a bit longer and long will trigger

different responses of the drive. The time intervals are set individually.

Short actuation

 (shorter than Time 1): The drive is positioned step-wise and stopped.

Holding it slightly longer

 (longer than Time 1, but shorter than Time 1+2): Drive

running. Drive stops when the button is released. 

Long holding

 (release after Time 1+2 runs out): Drive moves independently to the end

position. The movement can be interrupted by a short tap.

Control mode

• Standard
• Standard inverted
• Comfort mode
• Dead man's switch

Control mode

Standard

Behavior during button operation:
short = stop/increment long = Up or Down

Time between short and long 
in 0.1 seconds

1...50; 10

Control mode

Standard inverted

Behavior during button operation:
short = Up or Down long = Stop/Step

Time between short and long 
in 0.1 seconds

1...50; 10

Repeat the step command
for a long button press

every  0.1 s • every 2 sec; every 0.5 sec

Содержание 70715





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды