28
Parameter setting
Radio Actuator KNX RF S1R-B2 compact
• Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input as temperature encoder:
If the input is used as a temperature encoder, then choose the bus function
"Temperature encoder" and specify which value between -30°C and +80°C will be sent.
By sending a temperature value, the target value of the temperature control may be
changed for example.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input as brightness encoder:
If the input is assigned and shall be used as a brightness encoder (e.g. threshold value
of a sun sensor), select "brightness encoder" and specify which value will be sent.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input for scene control:
If scenes are called and saved with the input, then choose the "Scenes" bus function
and specify the saving, time difference (call/save) and scene number.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Use blocking object
No • Yes
Function
Temperature encoder
Temperature in 0.1°C
-300...800; 200
Use blocking object
No • Yes
Function
Brightness encoder
Brightness in klux
0...100; 20
Use blocking object
No • Yes
Function
Scenes
Button operation
• without saving
• with saving
Time between calling and saving in 0.1
seconds
(only if selected "with saving")
1...50; 20
Scene No.
0...127
Use blocking object
No • Yes
