elsner elektronik 70715, Установка и настройка

Страница: 16 / 36

14 Parameter setting
Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
6. Parameter setting
The default settings of the parameter are labelled by an underscore.
6.1. General settings
First set the general parameters for the bus communication (telegram rate,
transmission delay). Additionally, you can indicate if for the programming of scenes
all, or only the changed settings are applied to the bus.
6.2. Output
State here what is connected to the output channel.
Thereafter, the setting options will appear:
Settings for drives (shutter/blind/awning/window):
• General specifications for the connected drive
(see
Channel settings – drives , page 15)
• Control functions: Movement range limit, blocking, type of automatic
(see
Control (drives) , page 17)
• Scenes: Movement positions (see Scenes (drives) , page 24)
• Button inputs: Configuration as actuator button, bust button or for zero position
sensor (see
Button inputs (drives) - Input as bus button , page 25)
Transmission delay of threshold values
after power returns 5 s … 2 h
Send delay of switching and status
outputs after voltage returns 5 s … 2 h
For the use of scenes:
Application when programming all parameters • only changed parameters
Label for objects Enter a label here!
Operating mode • do not use
• shutter
• blind
• awning
• window
• double switch function
Use input 1 no • yes
Use input 2 no • yes
Operating mode
Channel A controls • shutter
• blind
• awning
• window
• double switch function