Basic Information
Safety Notes
Components and piping of the cooling
circuit should never be used for
transport.
The heat pump is fastened to the
transport pallet.
All electric circuits must be de-
energized
before opening the unit.
All work on the cooling circuit must be
carried out by trained technicians who
are familiar with and trained in the
use and handling of the coolant.
Never use abrasive, acidic or
chlorine-containing cleansers on
the surface of the equipment.
Safety Notes
The following notes and information
are generally used in the operating
instructions:
Comply with information
about function and opera-
tion.
Always comply with and
observe all safety notes
and safety information.
Information about the
operating instructions of
the controller LOGON B
WP
Setup, installation, configuration, and
initial start-up of the heat pump sys-
tem must be carried out by a qualified
technician applying the relevant
statutory rules, regulations, and guide
-lines, as well as the operating
instructions.
The use of the heat pump must be
reported to the local utility or electric
company.
Do not tilt the heat pump more than
30° when transporting. Avoid expos-
ing the heat pump to any type of
moisture or humidity.
Protect the heat pump from damage
and dirt during all construction phas-
es.
4
