EKOM ASPINA DO M, Руководство пользователя

Страница: 18 / 196

INSTALLATION
NP-DO M-39_12-2021 18 12/2021
PNEUMATIC CONNECTION
Risk of damage to pneumatic components.
Suction tubings must not be broken.
ELECTRICAL CONNECTION

The dental suction equipment model 230V is delivered with the safety plug.

Keep the socket easily accessible to ensure that in an emergency, the device can be safely
disconnected from the mains.
Risk of electric shock.
It is necessary to follow all local electro technical regulations. The mains voltage
and frequency must comply with the data stated on the device label.
Risk of fire and electric shock.
Power cord must not be broken.
COMMISSIONING
After unpacking, put the suction equipment on the floor, open the door and check whether the
separator’s cover (10) with sensing electrodes is attached to the separation vessel (11). In case of
need, fix the cover to the vessel and then follow the instructions in the Chapter No. 13. Close the
door and connect the suction equipment power cord to the socket. Change the main switch (5) over
into the position “I”, the indicating lamp for the network (3) goes on and the suction equipment is
ready for the operation.
Risk of use of incorrect cannulas.
Suction cannulas must comply with local legislative and technical requirements
for dental suction cannulas and their connection dimensions must be compatible
with suction cannulas connectors of 11mm and 16mm diameter.
Cannulas are not delivered in a sterile state!
Suction cannulas must undergo complete preparation cycles before first use and
after each patient or use following instructions in Chapter 14.8
Dental suction equipment is not equipped with a backup power supply!