59
Troubleshooting
PC Problems
Problem
Cause and Action
Cannot connect to the PC
using USB
●
Could you have turned on the power to the F-1 after the PC and the F-1
were already connected using USB?
➔
First turn on power to the F-1, then connect the PC and F-1 using USB (p. 29).
*.dv files do not play on
the PC
●
Is QuickTime
™
installed on your PC?
➔
*.dv files cannot be browsed or edited on a PC that does not have
QuickTime
™
installed. Please download the QuickTime
™
application from the
Apple website.
http://www.apple.com/quicktime/download/
Playback Problems
Problem
Cause and Action
“Format Disagreement.” is
displayed
●
Does the format of the HDV/DV camera match that of the material file
being played?
➔
Set the format of the HDV/DV camera so it matches the format of the material
file to be played. If the formats do not match, then the stream cannot be
played on the F-1.
There are also cameras that have a mode that automatically switches the
HDV/DV format. Even if this mode is set, you may not be able to play the
stream on the F-1.
Timecode is not output
correctly
●
Could you be capturing an HDV/DV stream that does not include
timecode?
➔
If you capture an HDV/DV stream without timecode, the timecode won’t be
saved correctly in the “*.dv” or “*.m2t” file that is created. As a result, upon
playback, the timecode that’s output will be incorrect.
Audio Problems
Problem
Cause and Action
The microphone cannot be
used
●
Is a condenser microphone connected?
➔
When a condenser microphone req48v phantom power is connected,
please set the [+48V] switch to “ON” to supply phantom power (p. 13).
The volume of the device
connected to the AUDIO IN
Connector is low
●
Is the [GAIN] switch set to “-20dB”?
➔
If the audio input from the microphone is still too low after adjusting the input
level, please set this to “MIC” (p. 13).
The captured audio is too
low
●
Did you adjust the audio input level?
➔
Turn up the audio input level using the [AUDIO IN Level] knob (p. 14).
F-1_v2_e.book 59 ページ ２００９年４月１７日 金曜日 午前１０時４７分
