12
Making a Recording
4
Connect the F-1 and HDV/DV camera with the i.LINK cable.
* There are two types of i.LINK cable connectors: 6-pin and 4-pin. Make sure to use the i.LINK
cable that matches the device that you are using.
* The i.LINK cable unplugs easily, so be careful when filming in busy locations.
* To prevent malfunction, always turn off the power on all devices before making any
connections.
* The EDIROL DV-7R and DV-7PR are not supported.
* To ensure stable capture, do not connect anything to the USB connector.
1
Put the HDV/DV camera in “Camera Mode” and turn on the power.
* “Camera Mode” may be called by another name, depending on the camera manufacturer.
2
Press the [
(POWER)] button on the F-1 to turn on power.
The POWER lamp lights when power is turned on. Please wait until
the Home screen is displayed.
The status lamp lights according to the format of the connected
camera.
* It may take up to 10 seconds for the camera to be recognized.
3
Press the [
(REC)] button on the F-1 to start capturing
video.
Press the [
(STOP)] button to stop capture.
* See “Checking Captured Video and Audio” (p. 15) when checking on
the captured video.
Capturing
For HDV format or MPEG-2 TS format
The HDV lamp lights.
For DV format
The DV lamp lights.
i.LINK
connector
i.LINK connector
i.LINK cable
Home screen
If you press the [
(REC)]
button
during capture, a marker file
(F1_xxx.txt) will be created containing the following contents. While this
is being done, the message shown at right will appear.
(1) Timecode (2) Value of the recording counter, when the [
(REC)] button was pressed
Using Markers
F-1_v2_e.book 12 ページ ２００９年４月１７日 金曜日 午前１０時４７分
