57
Configuration Settings
3
Verify by pressing the [
(ENTER)] button.
The amount of time over which continuous capture can take place varies depending on
your selection for the “Codec Type,” as follows.
Here’s how to select the channels for SDI embedded audio to be used for audio input to, and
output from, the VC-50HD’s SDI connector.
1
Press the [MENU] button to access the Menu screen,
and select the “SDI Audio Ch.”
Select the “SDI Audio Ch” with the [
(
)] [
(
)]
buttons, and then press the [
(ENTER)] button.
2
Select the audio channels with the [
(
)] [
(
)]
buttons.
3
Verify by pressing the [
(ENTER)] button.
MPEG-2 TS 35Mbps: 6.5 hours
/
9Mbps:
25 hours
MPEG-2 TS 50Mbps: 4.5 hours
/
12Mbps: 18.5 hours
MPEG-2 TS 8Mbps: 28hours
/
2Mbps:
112.5 hours
Setting the Channels for SDI Embedded Audio
Value
Description
1-2 ch
The selected audio channels will be used for SDI
embedded audio.
3-4 ch
5-6 ch
7-8 ch
F-1_v2_e.book 57 ページ ２００９年４月１７日 金曜日 午前１０時４７分
