11
Making a Recording
Connect an HDV/DV camera to the F-1 with the i.LINK cable, and capture the camera output.
1
Install the removable storage included with the F-1.
* Make sure to switch off the power before installing the removable storage. Failure to do so may
result in damage to the contents of the removable storage.
Unlock the rear cover, then open it.
With the grooved side facing up, insert the removable
storage.
With the handle lowered, firmly insert the removable
storage until it reaches the back.
Close the rear cover and lock it.
2
Connect the AC adaptor.
* Batteries can be used as backup power. If batteries are used, even if power from the AC
adaptor is cut off by a power outage, the capture process will continue.
See “Using Batteries” (p. 24) for details.
3
Attach the included ferrite cores to both ends of the i.LINK cable.
Insert the i.LINK cable in the ferrite core, and close and press the ferrite core together
until you hear a click.
Capturing by Connecting a HDV/DV Camera
Preparations
Handle
Removable
storage
AC adaptor
(included)
Power cord
(included)
Lamp
Power outlet
Power connector
* The shape of the power cord’s plug
varies depending on the country.
Conversion cable
(included)
* Place the AC adaptor so the side with the
indicator faces upwards and the side with
textual information faces downwards. The
indicator will light when you plug the AC
adaptor into an AC outlet.
Ferrite core
(included)
Ferrite core
(included)
* Make sure to attach the ferrite core before
using the i.LINK cable.
F-1_v2_e.book 11 ページ ２００９年４月１７日 金曜日 午前１０時４７分
