54
Configuration Settings
The “POWER Lamp,” “REC Lamp,” and “Status Lamp” on the front panel light according to the
F-1’s status. These lamps can also be set so they don’t light.
1
Press the [MENU] button to access the Menu screen,
and select the “LED.”
Select the “LED” with the [
(
)] [
(
)] buttons, and
then press the [
(ENTER)] button.
2
Set whether to use these lamps with the [
(
)]
[
(
)] buttons.
3
Verify by pressing the [
(ENTER)] button.
To reduce power consumption, the power can automatically be turned off when the unit has
not been operated for a predetermined amount of time.
During capture or while connected via USB, the power does not turn off even if no operations
are performed within the set period of time.
1
Press the [MENU] button to access the Menu screen,
and select the “Auto Power OFF.”
Select the “Auto Power OFF” with the [
(
)] [
(
)]
buttons, and then press the [
(ENTER)] button.
2
Select the time until the power turns off with the
[
(
)] [
(
)] buttons.
3
Verify by pressing the [
(ENTER)] button.
Setting the Lamp Illumination Method
Value
Description
OFF
The lamps are always off.
Example: The POWER lamp does not light even if
the power is on.
ON
The lamps light according to the F-1’s status.
Setting the Time for the Power to Turn Off Automatically
Value
Description
OFF
Off
3 min
If the specified time passes after an operation, the
power turns off automatically.
The POWER lamp begins to blink thirty seconds
before the power is turned off.
10 min
30 min
60 min
F-1_v2_e.book 54 ページ ２００９年４月１７日 金曜日 午前１０時４７分
