23
Basic Operations
* Batteries can be used as backup power. If batteries are used, even if power from the AC adaptor is
cut off by a power outage, the capture process will continue.
See “Using Batteries” (p. 24) for details.
1
Connect the AC adaptor.
fig.ACadaptor.esp
2
Press the [
(POWER)] button on the front panel to turn on power.
The POWER lamp lights when power is turned on. Please wait until the Home screen is
displayed.
* The F-1 is equipped with a protection circuit. A brief interval (a few seconds) after power up is
required before the unit will operate normally.
1
Press the [
(POWER)] button on the front panel.
2
When the “Power off.” message is displayed, press the [
(POWER)] button
again.
To turn off power, press the [
(POWER)] button within five seconds of the message
display.
Turning Power On/Off
Turning Power On
Turning Power Off
AC adaptor
(included)
Power cord
(included)
Lamp
Power outlet
Power connector
* The shape of the power cord’s plug
varies depending on the country.
Conversion cable
(included)
* Place the AC adaptor so the side with the lamp
faces upwards and the side with textual
information faces downwards. The lamp will light
when you plug the AC adaptor into an AC outlet.
F-1_v2_e.book 23 ページ ２００９年４月１７日 金曜日 午前１０時４７分
