5. Adjustments and Settings
Rebel
80
21
5.2
Changing bar pushers
To change the bar pusher, start with the V-channel in the down position. Remove the 3 screws
that hold the front bushing in place and slide the bushing onto the bar pusher. At the rear hub of
the pusher, flip the selector cam out of the notch to release the bar pusher from the carriage.
Slide the bar pusher forward far enough to be able to raise the rear of the pusher clear of the
carriage. Pull the pusher backward to clear the front plate and lift and the bushing out of the
machine.
Installation of the bar pusher is the process in reverse. Slide the front of the pusher into to hole
for the bushing, slide the pusher hub into place and flip the selector cam into the notch. Slide
the bushing into place and replace the 3 screws.
