8. Maintenance
Rebel
80
40
8
.4
Maintenance Screens
To access the maintenance screens press the “Maint Screen” button from the start page.
This will bring up the maintenance menu screen.
From the Maintenance Menu screen the loading fingers, V-tray and bar pusher functions can be
set.
Fingers
The function of the fingers are to hold back the material on the magazine so that only one bar is
picked up at a time for loading. The fingers automatically adjust to the correct position when the
bar diameter and material profile are set in the part program.
Jog / Set Fingers: Pressing this button calls up the screen to allow adjustment and manual
jogging of the fingers
If the fingers do not correctly separate the bars on the magazine the adjustment can be changed
from this screen. Use the “Jog to Bigger Diameter” or “Jog to Smaller Diameter” buttons to
position the fingers so only one bar will be lifted into the V-tray.
continued next page
