ECOSAIRE EN Series, Руководство пользователя

Страница: 131 / 142

OEM
CAREL code +030221791 - rel. 2.1 – 21/09/07 23
5. STARTING, CONTROL AND SHUTDOWN
IMPORTANT WARNINGS:
1. Before starting the unit, check that the humidifier is in good condition, that there are no water leaks and that the
electrical parts are dry.
2. Do not power the appliance if it is damaged or even partially wet!
When installation is completed, flush the supply hose for around 30 minutes by piping the water directly into the drain
without sending it into the humidifier.
This will eliminate any scale or processing residues that may block the fill valve or cause
foam when boiling.
5.1 Preliminary checks
Before starting the humidifier, check that:
•
the water and electrical connections and the steam distribution system have been completed according to the instructions contained
in this manual;
•
the water shut-off tap to the humidifier is open;
•
the line fuses are installed and intact;
•
terminals AB on the CP control board are jumpered or connected to the remote ON/OFF contact; also check that the ON/OFF
contact is closed;
•
the steam outlet pipe is not choked.
5.2 Starting
5.2.1 Starting with an empty cylinder
This phase will be performed automatically when the unit is started: the rated production will be reached after a certain time (this
times depends considerably on the conductivity of the supply water and may last a number of some hours).